The auto bailer for the Laser® Sailboat. Pull to drain push in cork to stop flow. Made by Holt Nautos. Not builder supplied so not class legal. |
|
| This is the arm for the Nautos Bailer for the Laser®. They do go missing sometimes! |
|
|
| This repair kit includes the "ramp", 2 O rings and a plug. Keep your bailer going inexpensively. This kit is not builder supplied so it is not legal for class events to have it on your boat. |
|
|
| Never hurts to have spares! |
|
|
| Springs, not rings, give reliable function and allow use of broken bailers Laser sailboat or dinghy bailers suffer frequent O-ring failure. LaserSmartParts stainless steel replacement springs are fit-and-forget; they will outlast the boat. No more racing with the chute down causing drag when you want it up, and reduced risk of damage when coming ashore. The more positive action also helps keep the bailer open when selected, so you will not have to take off the bung and tape down the rod. (recent rule change). LaserSmartParts springs are easily fitted without changes to the bailer. Fitting these will save you time and money on an awkward and fiddly repair; they will also work with broken or weakened pivots, saving the cost of a new bailer. |
|
Sailing can be green! See our recycle your old sail offer Send us email |