Click to enlarge

Bow Bumper for the CFJ

Protect your fleet! These bow bumpers will protect your bows and your transoms. Remove the crunch from team racing.

Installation Instructions;

Rough up the back side with some 80 grit, clean with acetone. Hold the bumper on the bow, draw around the edge with a pencil. Masking tape ~3/16" outside this, wipe the bow with acetone to clean & remove the pencil. Run the 4200 back and forth and fill the whole backside of the bumper with lines of adhesive. Press it in place on the boat and push firmly so it oozes out all around. Make a nice filet with the finger at the edges, remove tape and do a final clean. Apply some tape to hold until the adhesive cures.


We list our current available inventory in our shopping cart.


Due to the wide variety of the size and weight of our items we will charge the actual cost of shipping in a separate charge on all orders.You may email us for a shipping cost estimate.

Send us email

intensitysails(at sign)